Saturday, February 4, 2023

Review of the Cada Japanese Tea Shop C66010 Building block Set (not Lego)


Hello brick fans!  Welcome to the Cada C66010 Japanese Tea Shop!  That's the set we are reviewing today.  It's the third in a series of Japanese style buildings designed by Tong Xin Jun aka ExeSandBox.  The other two buildings in the series are:

Cada C66006 Japanese Steamed Bun Shop 

Cada C66007 Japanese Coffee Shop

If you loved those little buildings, you are most certainly going to want to include the Japanese Tea Shop to your collection.  The shop has 1200 pieces with full interiors within the two floors of the building.  

The exterior looks like a very authentic Japanese shop, complete with vending machine and little bonsai plants on the shop's doorstep.  There is a large utility pole right outside with transformer and street lamp.

Around back, one can view the interior of the shop by ingeniously sliding the whole back wall.  We will look at all of the interior details below.

Where to get it


Afobrick.com has all three of the Japanese inspired buildings on their website.  They have kindly provided today's set for me to review.


Feel free to check out their store, they have over 700 competitively priced building block sets, available in all sorts of themes. Free worldwide shipping for most orders.  Please use my discount code itsnotlego to save a further 5% off their already low prices.

The Set Details

  • Brand: Cada
  • Set: C66010 Japanese Tea Shop, designer: Tong Xin Jun
  • Piece count: 1200pcs
  • Numbered bags? Yes
  • Stickers or printed parts? Stickers
  • Missing or deformed pieces: No
  • Extra parts: Yes
  • Minifigures: No
  • Lighting kit: included
  • Brick Quality and Clutch: Excellent
  • Measurements (approx): 
  • Age Rating: ?+


Unboxing


The Cada Japanese Tea Shop arrived in a brown cardboard box from Afobrick.com. Inside were several bags of building blocks, two sticker sheets and two instruction booklets.  There are 57 pages on the first booklet and 115 pages on the second booklet.  I wonder why Cada just didn't print one booklet instead of two?  Same with the sticker sheets. They are small enough that they could have simply used one larger sheet of stickers.

Here's a closer look at the stickers, some with Japanese wording and the majority of them are for the canned drinks inside the vending machine.

Here's the breakdown of the bags for parts corresponding to each step of the build.

Step A consists of 6 bags
Step B consists of 6 bags
Step C consists of 5 bags

Also included are three individually wrapped transparent window pieces, a bag containing special parts for the utility pole, a bag containing the LED light string, and an assortment of baseplates.



The instruction manuals are well printed and easy to follow.  The last few pages of the second instruction manual features a complete visual parts list just like Lego manuals.


As you can see the building process has three different steps.  Step A builds the foundation and first floor of the tea shop.  Step B adds the second floor and sliding rear wall, and Step C builds the roof, and remaining accessories.  Let's dive in now!

Building Step A


The baseplate is 16 studs wide but shorter than the standard 32 stud depth of other Lego modular buildings.

Flipping it over, we see the structure of the base.  I would have much preferred that the tea shop was built on a regular 16x32 stud baseplate.  It would add so more space in the front and back of the shop.

I really like how storage was incorporated into the bottom of the staircase.  I need to do this more in my other MOC buildings.  The tea is stored in several containers and shelf drawers and fronted by a long counter.  For tea tasting there's a round table with two stools.


The front doors to the tea shop can be conveniently opened and closed by sliding each one.

Front awning installed.

You get one long LED light strip with USB plug included with the set.  You simply thread the wires around the interior of the building's first and second floor.  I used a battery pack from one of my Funwhole branded building sets to provide power for the lighting.

Building Step B


Here you can see that step B  completes the interior of the second floor.  It looks to be a tea tasting room that has a raised floor with tatami mats.  A low table and seats adron the room.  The lighting is a bit of a mess but it's been installed in the second floor.


On the front of the second floor, there is an air conditioner mounted next to the balcony.  On the other side of the balcony is some kind of utility box. It opens but there's nothing inside.  One can access the balcony from the inside via the sliding door.

The instructions for building the rear wall are split between the first and second instruction manuals.  It slides open as we will see later.  It's interesting how the designer uses the ladder piece for the rear window grill.

Building Step C

The roof is attached to the building through a series of clips.

With the roof attached, we test out how well the rear wall slides.  Pretty smooth!


The vending machine and utility pole really enhance the look of the set.  The dark blue roof tiles provide a nice contrast to the tan bricks walls.

I'm not sure why there is a rear notch in the baseplate.  I ended up removing the piece when I rebuilt the base.

Here are some of the leftover/extra pieces afterwards.



I think the Cada Japanese Tea shop is a very nice model.  Fit and finish of the bricks was excellent.  Too bad it doesn't come with any minifigures though.  I've added a few of my own for display purposes.  That little pink bike isn't included either, sorry!

The lights don't seem quite as bright as my other Cada sets, maybe my batteries are low in juice?

I'll probably see if I can replace the lighting with some from Lightailing/Briksmax in future.


Here is the Cada Japanese Tea shop pictured with the other two Japanese shops. They certainly make a nice little street scene altogether.

Also on Aliexpress, find it using the term Japanese Streetview.

I had a great time building this set, and it took me less than a day.  The only improvement to the set would be using a standard 16x32 baseplate, oh and add some minifigures!  I'm going to give this set 4.8 out of 5.  The look and the price of the Japanese Tea shop really beats out any similarly priced Lego set.  Highly recommend!

Thanks for looking, bye for now!

No comments:

Post a Comment