How I made a Lego compatible Cyberpunk Style tower

 

Hey brick fans!

Here's some pics of a cyberpunk looking tower I made.  It was heavily inspired by the Lumibricks/Funwhole Cyberpunk Neon city set.   But I wanted a simple design that wasn't too hard to build.  So I came up with this stackable tower.  It's totally modular and you can build it as high as you want given the parts you have on hand.  

In this example, the tower consists of three cubes which I stacked on top of each other.  If you're ambitious, you could even add lighting to the tower, but that's optional.  

Here's what the tower looks like, separated into the three cubes.  You can start by creating one cube, and then continue to add cubes as you acquire more parts.

I actually re-used the rooftop from the Lumibricks Cyberpunk apartments with some adjustments, but you could come up with your own rooftop design if this doesn't suit your needs.  In the Blade Runner movie, I remembered that the city scape had flames shooting up into the night sky, so I tried to replicate that with the flames coming out of the roof.

In it's simplest form, the cube uses a 16x16 stud base, with girders on each corner.  I placed 2 corrugated wall panels and 2 window panels on each side of the cube.  Just repeat this design on all four sides of the cube.

To add some visual interest, I added screens using a fence piece to the inside of the window panels.

To make the cubes stackable, just top them off with smooth tiles and put 2x2 jumper tiles on each of the four corners of the girders.

For more visual interest, you can add pipes or conduits running down the side.

I have pipes running down each cube on 3 sides.   I also aded signage for extra detail.  I've perched my cyberpunk tower on the roof of my existing nightclub building.  More details about my custom strip club modular building can be found here.

For an extra pop of colour, I added lighting to my Cyberpunk tower.  I used different no name branded light kits I found on Temu.

For the exterior of the tower, I installed a red LED strip light on three sides of the tower.  Since I have three cubes, that makes a a total of 9 red strip lights.

This is the led kit i used. It comes with 10 led light strips, two expansion boards, one connecting wire, and one usb plug.  With three cubes, I needed to add another expansion board from my light kit stash.  Here's the Temu link for this light kit.

Inside each of the cubes, I have the red led light wires connected to a six port expansion board.

Here's what the connection looks like inside each cube.  I have another wire that connects one cube's expansion board to another cube's board.  On the lowest cube expansion board, I've attached a USB plug that runs out the bottom.  Refer to the second pic from the top of this blog post to see how that looks.

For the interior, I used the same brand of LED lights I used to light up the upper part of my Lumibricks tower.  The light strips are sold in different colours, but I chose pink and ice blue as those colours seem to be most representative of cyberpunk colours.  I used one ice blue coloured light strip inside each cube and linked them together using connecting wires.

This LED kit is also found on Temu and it goes by the name MAXCXT.  The kit includes a few extra connecting wires than the other red light kit.   Here's the TEMU link for the MAXCXT light kit.

So let's review the basic parts you will need to make one cube:

2 piece16x16 stud baseplate (top and bottom of the cube)

4 pieces of girder part

8 pieces of corrugated wall panels

8 pieces of large windows

8 pieces of clips for the fence part

4 fence parts

4 2x2 jumper tiles

assorted smooth tile pieces that attach to the top of the wall and window panels.

Finally, if you plan on adding a lighting kit, instead of using one 16x16 baseplate, you might want to consider using a collection of sized smaller plates for the top and bottom of each cube.  Leave a hole so that the light connecting wires can pass through from one cube to the next.   

If you like the Cyberpunk style, you will love the Lumibricks Cyberpunk sets!

Anyways, hope this mini tutorial guides you in building your own Lego compatible Cyberpunk style tower.  Let me know if it helps!    Thanks for looking and Bye for now.